skip to content

stone fireplace carved from solid natural English stone

A timeless stone fireplace surround which is suitable for any interior, and will make a stunning centrepiece. Use with a stoves or open fires, complete with a matching three piece outer hearth.

Product Code:diamond stone fireplace

Buy Now

The Diamond solid natural British cotswold stone fireplace complete with 3 piece outer hearths

FREE DELIVERY for limited period to mainland England and Wales

This beautiful design is similar to the Jade stone fireplace surround but has internal chamfers to soften the edges and is also available without a mantlepiece called the Ruby fireplace - please see alternative designs. This beautiful stone fire surround will be carved by hand from local natural quarried cotswold stone to the many designs available to purchase through the website using traditional methods of mallet and chisel.  It will contain shells, fossils and viening as over 165 million years old.

The overall height will be approximately 1020mm from ground floor when pointed and bedded.

lintel: 1020mm x 200mm high x 100mm depth internal chamfer

hearths: 1120mm x 350mm x 50mm in 3 sections chamfered.

mantlepiece: 1120mm x 150mm depth x 60mm high plain

uprights: bedded 700mm high x 200mm wide x 100mm depth with inside chamfer

The opening is 700mm high x 620mm wide off hearths to underside of the lintel. 

All our stone fireplaces are suitable for wood burners, multi fuel stoves or open fires, this simple design is a must for modern homes. An inner hearth is available to purchase seperately if required please see stone hearth listings these start from £70.  

Can be supplied without hearths if not required for a reduced cost please contact us for costings.

As we carve to order, these sizes can be increased/decreased so please contact us before purchase if you require alterations to these sizes as there will be a cost implication - please email with your made to measure requirements or call Chris direct on 07976 240893  Do not purchase off this listing if a made to measure service is required as you will receive the sizes in the listing.

This fireplace consists of 7 solid stone sections will which arrive via a pallet lorry of 18 tonnes (similar siez of single bus) using a tail lift on a roadside signed for delivery,Monday to Friays only 8-6pm, no timed deliveries,  you will receive full fitting instructions, brackets and screws and the mortar for the pointing of the fireplace or alternatively you would be welcome to collect from our workshop in Tetbury, Gloucestershire  Monday to Fridays only 9.30-2pm in a suitable vehicle free of charge where we would load your vehicle for you, it will not be palletised on a agreeable day/time.  Due to the size of the haulage lorry it can not park on driveways or go along narrow lanes etc.  If unsure please contact us to discuss before purchase.

Delivery/collection on a standard size Diamond to the measurements above is currently 4 weeks from order.  Please check when placing your order.

You will need two strong people lifting the stone sections at all times, these sections are heavy and please check your fireplace within 24 hours of receipt of delivery. Visit our FAQ section for further advice.

We can offer this fireplace with a back insert panel which allows a gas or electric fire to slot neatly into the opening for an additional £80 for a standard 410mm x 570mm opening and we will cut a rebate in the uprights and underside lintel to accept the 3 piece back panel (reducer slips).

As a natural material the stone will contain shells, fossils and veining as part of the natural beauty of stone.